Security DVR to Internet?

Question by fuze: Protection DVR to Web?
Hoping to connect a protection camera DVR to the world wide web.

I am a bit confused. I've entered my IP, Subnet mask and Gateway as it appears in my router configuration (and the info sheet offered by the ISP). This is not functioning.

My real IP seems to be diverse when searching at "Locate my IP" sites on-line (172.sixteen.**.** vs 24.155.***.** ) Could this be a issue?

I know my query isn't obvious, but it's a bit significantly to kind.

Thanks


Very best remedy:

Answer by Brian H
Your router has two IP addresses. One particular deal with faces your ISP (and the net). This is the a single that starts with 24.155. It also has a personal (inward facing) IP address 172.sixteen.1.1 All the products on your neighborhood network will have a comparable hunting IP deal with. This tackle is not routeable from the web. (i.e. no one can connect to, ping or "see" this tackle from the net).

Your router/modem does Network Deal with Translation (NAT) to map the private address with the public address producing the personal-to-public transition practically transparent to the conclude person.

Okay. So here's your difficulty. Your camera or DVR has a private tackle and you want to handle it from the public world wide web. There are 3 ways to do this:
(one) You have to figure out configure your router to allow connections from the web straight to your digital camera/DVR. If your modem/router doesn't let this, there are ways to trick NAT into allowing the connection. For information on how to do this search for "NAT Hole Punching". This will become significantly more challenging if you have a dynamic IP address with your ISP instead of a static IP handle.
(2) Have your camera/DVR initiate the connection to your computer on the public net. (this might not be doable depending on your products).
(three) Have a 3rd get together server that keeps track of how to connect to your camera/DVR. This is particularly beneficial if you have a dynamic IP tackle with your ISP. Cisco/linksys cameras use the tzo.com support.

I would think your camera/DVR would have a manual that would reveal how to get it to function in a non-public network with NAT.

Know greater? Leave your personal reply in the feedback!